Mccloskey R230

The McCloskey R230 supports demanding screening work

McCloskey R230 is a tracked screen built for material separation in aggregate, soil, and recycling work. The machine combines a large feed area with a screening setup that supports steady throughput. For contractors and processing sites, this layout is relevant when material must be handled continuously across changing conditions.

The hopper capacity is 11.5 m3. Extra high hopper sides support feeding with wheel loaders and help contain material during loading. A belt feeder is fitted, and feeder speed and start or stop functions are controlled by wireless remote control. This gives the operator direct control during loading and setup.

The screening layout is designed for clear material separation

The screen arrangement is configured for separation into several fractions. The top deck measures 6100 x 1830 mm and is fitted with an 80 mm finger deck. The bottom deck measures 5490 x 1830 mm and uses a 25 x 25 mm square mesh. These details provide a clear basis for assessing the screen against required product sizes.

A rib belt is fitted on the tail conveyor. Smooth belts are used on the middle and fine fraction conveyors. This combination supports discharge of different material types after screening. It is relevant where output fractions must remain separated for stockpiling, loading, or further processing.

The powertrain supports daily operation on active sites

The machine uses a Volvo D5 Stage V diesel engine rated at 218 hp. The engine setup includes a diesel particulate filter and SCR with AdBlue. This gives buyers factual information about the emissions technology and engine platform used in daily operation.

For companies planning fleet use, the engine and feeder control setup matters in practical terms. Remote feeder control helps adapt material flow to the task and to upstream loading. This is useful when feed conditions change during the day or when the material varies in size and moisture.

The undercarriage is relevant for movement around processing areas

R230 runs on steel tracks with 500 mm track shoes. This undercarriage supports movement across rough ground and prepared processing areas. It is relevant for sites where the screen must be repositioned between stockpiles, feed points, and discharge areas without external transport inside the work zone.

The operating weight is 37200 kg. The machine length is 16970 mm, the width is 3000 mm, and the construction height is 3500 mm. These dimensions are useful when planning transport, access, machine placement, and working space on site.

Lighting and machine layout support longer working days

Four LED tower lights are fitted. This supports work during low light periods and improves visibility around the feed area and discharge points. For operators and site managers, lighting is a practical part of safe handling when screening continues beyond daylight hours.

Overall, the McCloskey R230 is configured for companies that need a tracked screen for consistent separation of bulk material. The hopper size, deck setup, tracked undercarriage, and conveyor arrangement give a clear picture of where the machine fits. It suits applications where capacity, controlled feeding, and defined fractions are key to the process.